Mild Steel, Stainless Steel and Aluminium floor gratings and stair treads — manufactured to IS 2062 / IS 800. Custom shapes, cut-outs and toe plates to suit your floor.
Bearing flats with secondary square bars, round bars, tor steel or sinusoidal cross rods at pre-determined pitch. Red oxide primer standard.
Workhorse galvanised grating for outdoor walkways, refinery floors and chemical plants where corrosion protection is critical.
Standard duty welded grating for industrial walkways, drainage covers and machinery platforms — supplied with one coat of red oxide primer.
Lighter-duty galvanised grating for utility platforms, drainage covers and pedestrian walkways where loading is moderate.
Heavy-duty galvanised grating for high live-load platforms — boiler halls, transformer yards and equipment decks.
Notched bearing bars for slip resistance — specified at fertilizer plants and oil rigs where slip resistance is critical.
Petrochemical-grade circular gratings with central column cut-outs and peripheral toe plates — our signature manufacturing capability.
Grating panels with end plates, fixing holes and optional nosing bars. Supplied site-ready with mounting lugs.
Light-gauge mild steel stair tread with end plates and fixing holes — for indoor stairs, mezzanines and access platforms.
Stainless steel stair tread for marine, food-grade and architectural applications — corrosion-free, no painting required.
Vehicle-rated trench covers for moving heavy lorries and forklifts across drainage trenches without damage to the grating.
Indicative — actual pitch and pattern designed to your live load and span.
| Bearing Bar | Typical Pitch |
|---|---|
| 10 mm × 3 / 5 mm flat | 30 mm c/c, secondary 100 mm c/c |
| 12 mm × 3 / 5 mm flat | 30 mm c/c, secondary 100 mm c/c |
| 15 mm × 5 mm flat | 30–40 mm c/c, secondary 100 mm c/c |
| 16 mm × 5 mm flat | 40 mm c/c, secondary 100 mm c/c |
| 20–40 mm × 5 mm flat (heavy duty) | 40 mm c/c, secondary 100 mm c/c |
All gratings designed to IS 800 and the National Building Code. Deflection at full load 1/325 of span or 10 mm — whichever is less. Bearing flats and bars rerolled to IS 2062.
Send your GA drawing or sketch — including span, live load and any cut-out requirement — and we'll return a fabrication-ready quotation with weights and deflection figures.